FLANGED VALVES

Worcester F51
Back

Size Range: 15-250mm (Reduced Bore)
Body Material: Carbon Steel, Stainless Steel, Alloy 20 (Others on request)
Seat Materials: Virgin PTFE,Reinforced PTFE, Flurofill, Peek, Metal
End Connections: Flanged BS4504 Table 10/16, ANSI 150/300LB
Pressure Rating: F51 - 19 Bar, F52 - 40 Bar

The Flowserve Worcester F51/52 Series provides a Class 150 and Class 300 valve in a one piece body up to sizes 8''. The valve fully complies with the requirements of BS5351 and is independantly third party approved.Available in a wide range of materails and seat options with both Class rated and PN rated flange options available. The screwed insert design allows for the valve to be used for end of line duty against full differential pressure rating.To meet BS5351 anti-static requirements the valve is fitted with mechanical devices within the stem to ensure safe static discharge to the body. The valve has also been witness fire tested to BS6755 part 2 as part of the compliance to BS5351.

Features:

  • BS5351 approved
  • Wide range of seat materials available
  • End of line pressure capability against screwed insert

 

 

 

reduced bore ball valves

 

Worcester F819/829
Back

Size Range: 25-200mm (Full Bore)
Body Material: Carbon Steel, Stainless Steel, Alloy 20 (Others on request)
Seat Materials: Virgin PTFE,Reinforced PTFE, Flurofill, Peek, Metal
End Connections: Flanged BS4504 Table 10/16, ANSI 150/300LB
Pressure Rating: F51 - 19 Bar, F52 - 40 Bar

Flowserve Worcester's F819/829 provides a full bore product range from 2'' to 8'' independantly approved to the requirements of BS5351. As part of BS5351 the valve has been witness fire tested to BS6755 Part2 making it ideal for use within the Petrochemical and allied industries.The valve has an ISO5211 mounting platform with a unique position indictator that remains in place during actuation to retain stem buld integrity and show the true valve position. All sizes are also fitted with a stem nut locking clip.The valve also meets the requiemnets of TA-Luft and has a secondary stem seal of PTFE fitted below the firesafe graphite packing.

Features:

  • BS5351 approved
  • ISO 5211 Mounting Platform
  • Indicator plate remains fitted during actuation
  • Wide range of seat material options
  • PTFE coated graphite body seals
  • Stem nut locking clip
full bore ball valves

Worcester E51
Back

Size Range: 15-200mm (Reduced Bore)
Body Material: Carbon Steel, Stainless Steel, Alloy 20 (Others on request)
Seat Materials: Virgin PTFE,Reinforced PTFE, Flurofill, Peek
End Connections: Flanged BS4504 Table 10/16, ANSI 150/300LB
Pressure Rating: E51 - 19 Bar, E52 - 40 Bar

The Flowserve Wocester E51/52 Envirosafe valves provides a unique dual stem seal arrangement in a one piece body design. The unique primary seal is designed to ensure it will always fail in service before the secondary seal. This allows for the failure to be detected before any leakage to atmosphere and the live loaded stem packing to be adjusted to reload the primary seal

The valve uses a one-piece anti-blow out stem design with the body complying with BS5351 wall thickness. For firesafe applictaions, graphite gland packing can be fitted to provide a certified valve (EF51/52).This unique valve minimises potential leak paths making the valve ideal for use on a wide range of toxic and harmful applications along with seaching or expensive media.

Features:

  • One piece body design to minimise leak paths
  • Unique dual stem seal arrangement
  • Primary stem seal leakage detection
  • Firesafe version available
  • Live loaded gland assembly
  • Wide range of build materials


enviro valves

McCanna Top entry
Back

Size Range: 15-500mm (Reduced Bore) 25-400mm (Full Bore)
Body Material: Carbon Steel, Stainless Steel, Titanium, Hastalloy (Other Exotics)
Seat Materials: Virgin PTFE, Peek, Metal, Ceramics, UHMWPE
End Connections: Flanged ANSI 150 - 1500LB
Pressure Rating: 16 Bar - 200 Bar

The Flowserve McCannaseal is the original patented Top-Entry, Wedge-Seated ball valve. Available in regular port sizes from 15mm through 500mm and in full port sizes from 25 through 400mm and pressure classes 150 through 1500. The McCannaseal reputation for consistent, reliable operation in handling today's most volatile applications is known the world over and is featured on most ''approved'' lists for all types of processes. Available with standard bonnet or with extended bonnet for cryogenic or high-temperature service. Wide range of body alloys and broad selection of seat and seal materials.

Features:

  • Top Entry-Inline serviceable
  • Wedge Seats. Spring-loaded, self adjusting
  • Back-seated conical stem seals. Blowout proof, seals tighter at higher pressure.
  • Bi-Directional
  • Polymer, metal, or ceramic seats available
  • Flanged, threaded, and weld-end bodies


top entry ball valves

Argus FK75M
Back

The FK75M ball valve with its many innovative design features represents the highest standards in valve technology and is designed to meet the API-6D, ANSI 16.34 and BS 5351 requirements. Long lifetime and low operating torques due to the clear seperation between sealing and bearing functions.

Design: Split body design with superfine finished padmounted ball, anti-blow-out stem, spring loaded ball seats with cavity relief and anti-static device. Long life double stem seal system and stem supported bearings to ensure seals are free from operating loads. Stem sealing construction complies with the latest TA-Luft and EPA (method 21) fugitive emissions requirements. Fire safe to BS 6755 and API 607. DIN ISO mounting plate for easy assembly with actuators included.

FK75M Product Range: DN80-200 ANSI Cl.150 Full Bore DN150-250 ANSI Cl.150 Red. Bore DN80-100 ANSI Cl.300 Full Bore DN150 Ansi Cl.300 Red. Bore DN80-100 DIN PN16-40 Full Bore DN150 DIN PN16 Full Bore

Accessories and Options:

  • Limit Switches
  • Locking Devices
  • Stem Extensions
  • Steam jackets
  • Metal to Metal seats
  • Drain and Vent/Bleed connections


argus ball valves

Argus FK76M
Back

The FK76M ball valve with its many innovative design features represents the highest standards in valve technology and is designed to meet the API-6D, ANSI B16.34 and BS 5351 requirements. Long lifetime and low operating torques due to the clear seperation of sealing and bearing functions, on both stem and ball.

Design: Split body design with superfine finished trunnion mounted ball, anti-blow-out stem, spring loaded ball seats, cavity relief and anti-static device. Long life double stem seal system and stem supported in bearings to ensure seals are free from operating loads. Stem sealing construction complies with the latest TA-Luft and EPA (method 21) fugitive emissions requirements. Fire safe to BS 6755 and API 607. DIN ISO 5211 mounting plate for easy assembly with actuators included for up to DN200, above please name your requirements.

FK76M Product Range: DN80-600 ANSI Cl.150,300,600 Full Bore DN100-600 ANSI Cl.150,300,600 Red. Bore DN80-600 DIN PN10-100

Accessories and Options:

  • Metal to Metal seats
  • High temperature stuffing box
  • Stem Extensions
  • Drain and Vent/Bleed connections
  • Steam Jackets
  • Special Materials (Alloy, Duplex and many more)

argus ball valves

Argus HK35
Back

The HK35 ball valve with its many innovative design features represents the highest standards in valve technology and is designed to meet the API-6D, ANSI B16.34 and BS 5351 requirements. Long lifetime and low operating torques due to the clear seperation of the sealing and bearing functions, on both ball and stem.

Design: Split body design with superfine finished trunnion mounted ball, anti-blow-out stem, spring loaded ball seats, cavity relief and anti-static device. Long life double stem seal systemand stem supported in bearings to ensure seals are free from operating loads. Stem sealing construction complies with the latest TA-Luft and EPA (method 21) fugitive emissions requirements. Fire safe to BS 6755 and API 607. DIN ISO mounting plate for easy assembly with actuators included.

HK35 Product Range: DN50-200 ANSI Cl.600-1500 Full Bore DN80-200 ANSI Cl.600-1500 Red. Bore DN50-200 DIN PN100-160 Full Bore

Accessories and Options:

  • Metal to Metal seats
  • Stem Extensions
  • Drain and Vent/Bleed connections
  • Locking Devices
  • High temperature stuffing box
  • Special Materials (Alloy, Duplex and many more)

argus ball valves